Your cart is empty
Polyester mooring line 133 made from 100% polyester in a 16-strand braided core-sheath construction. Exceptionally tear- and abrasion-resistant, with a high working elongation of over 15% for optimal shock absorption under load.
Protects the boat from damage upon contact with the dock or mooring, the dock fender significantly dampens the impact, thus preventing damage to the boat upon contact with the boat fender, the boat can glide and remains maneuverable offers …
HS shroud chainplate made of robust stainless steel sheet, providing a reliable attachment point (Ø 8 mm) for shrouds or stays.
Flat, elastic glasses strap made of high-quality neoprene for use on board and during water sports. Secure hold for sunglasses and sports glasses, floats, comfortable to wear and suitable for any head size – ideal for sailing, boating and …
Breathable regatta drysuit made from a robust 3-layer system for sailing and watersports. With reinforced knees and seat made of 600D polyester, latex seals at the neck, wrists and ankles, and a practical T-zip closure – ideal for cold and …
Allpa thermomagnetic fuse 135A
- English form - One-handed operation - Polished brass with ground tips. Length: 170mm Weight: 95g
"DF50A T Weight: ATS: 102 kg ATL 104 kg Shaft length: S- 381 cm L- 508 cm Propeller pitch: 9“-17” Color: Black (opt. white) Displacement: 941 cc Power (kW/hp): 36.8 / 50 Bore x stroke: 72.5 x 76 Gearbox: Mechanical Trim and tilt settings …
- The original MAGMA barbeque is made of highly polished stainless steel - With the included railing bracket, it is easy to attach to all 22 and 25 mm tubes - All you need for operation is a "CAMPING GAZ CV-470/270" butane/propane gas cyli …
High-quality spare parts for manual on-board toilets from Albin. Suitable for various models and ideal for maintenance or repairs on board.
Design: with counter plate Material: Niro
- 2-component epoxy filler for universal use in filler work above and below sea level - Recommended for GRP, CFRP, steel, aluminum and hardwood.
Specially developed for outdoor use • Interior made of stainless steel for high durability • Covered with high-quality synthetic leather, including decorative screen printing • Windproof design for clean and safe use on deck or outdoors • …
- Smooth, ergonomic, and easy-to-use buckle - Easy to open and close - For bags, sacks, tarpaulins, battery boxes, etc.
Max. pipe length 6 meters. Material thickness: 2 mm Outer diameter: 20 mm
LED emergency beacon compliant with SOLAS standards for fresh and salt water. Significantly increases safety at night and is automatically activated by water contact.
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
- Electric air pump - max. pressure 1 bar (inflate and suction) - incl. universal adapter - Alligator clips with cable (3 m) for 12 V - Air hose approx.
Metal carabiners included, making it easy and quick to attach to the SUP Comfortable foam seat and backrest Length-adjustable straps Detailed design: Higher backrest for a more upright and comfortable sitting position
- 4-strap water ski vest (Junior 3-strap) - strong nylon fabric - filled with closed-cell foam - CE certified.
The Allroundmarin Xtream 265 with aluminum floor provides an absolutely solid stance thanks to its stable floor and is ideal for longer sessions or transporting heavy equipment. The wide design and the raised bow master waves confidently and ensure safety. This model is aimed at anglers who prefer maximum stability and do not want to make any compromises on durability.
- 2-component repair kit for the permanent repair of high-quality inflatable boats made of neoprene, Hypalon, Synotex, PVC, or vinyl - Contents: 2 sheets 14 x 21 cm, 1 can of adhesive 125 g, 1 bottle of hardener 10 ml, sandpaper, 1 brush.
Desner's FCT console for classic RIB boats like the Classic 310. Robust steering console with integrated bench seat, backrest, and water-repellent seat cushion for added comfort on board. Features a main switch and 360° rotating beacon – ideal for remote-controlled engines.
Suitable for the following motor/gearbox types: BRAVO I - II - III - BRAVO THREE 500 CARB (502CID) 8.2L ENGINE (GEN +) - 500 (GEN. +) GM 502 V-8 1999 BRAVO I/II/III STERNDRIVE AND TRANSOM ASSEMBLY - BRAVO ONE 496 MAG STERNDRIVE EC - 496 MA …
YAMAHA SERVICE KIT F75/F90 (16&NEWER) + F80B/VF90 (ALL YEARS) + F115 (06&NEWER) 100HRS (8M0222222)
Original Suzuki Marine Outboard Maintenance Kit for DF25A and DF30A from 2015 onwards.
Suitable for the following Volvo Penta engine/transmission types:: DPX420-CF DPX420-DF 8.1Gi-B 8.1Gi-BF 8.1GiI-A 8.1GiI-B 8.1GSi-A 8.1GSiI-A 8.1GXi-A 8.1GXi-AF 8.1GXiI-A 7.4GiINCCCE 7.4GiINCSCE 7.4GiPEFS 7.4GiPBYCCE 7.4GiPLKDCE 7.4GiPLKECE …
- Made of galvanized 22 mm steel pipe - Lacquered, seawater-resistant wood - For motors up to approx. 60 kg - Height 900 mm.
- Suitable for freshwater.
Versatile and compact stainless steel fridge-freezer combination from the OCX2 series • Flexible adjustable single compartment that can be switched from fridge to freezer or back again at any time • New LED thermostat for precise temperatu …
- 2-component epoxy lightweight filler. Strong adhesion, resistant to water and good sandability - for all repairs in the surface and underwater area. Recommended for GRP, CFRP, steel, aluminum and hardwood.
Be the first to review this product.
No reviews yet.
No questions yet.
- Micro-light filler containing microspheres - fills in indentations and is used to build surfaces - Can be well shaped and sanded - Add between 7-16% by weight to the epoxy mixture.
- The filler mixture FB is ideal for filling - Blends well with the epoxy mixture and results in a smooth filler surface that is easy to sand - Add between 35-60% by weight to the epoxy mixture.
- 2-component polyester glass fibre filler for more highly stressed backfilling and repair of minor laminate damage - Very good adhesion properties to metal, GRP and wood.
- Reinforcement mat for the production of laminates in combination with polyester and epoxy resin.
- The microfibre filler MF is used as a reinforcement and thickening additive - Makes a universally applicable adhesive - The microfibre filler offers good gap filling - Add between 4-18% by weight to the epoxy mixture.
Polyester gelcoat filler for repairing damage (scratches, cracks, scratches, chips, or holes) in gelcoat above and below water.
- 2-component polyester resin, hardener and glass mat in a matching set for easy repair of damage and leaks to GRP laminates.
- Glass fabric for laminates with good transparency - Suitable for polyester and epoxy resin.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch