Your cart is empty
- Made from reinforced PVC and durable nylon strap.
- Made of weather-resistant rubber - very easy to assemble - for protected berths you need 2 to 3 pieces, for unprotected berths you need 4 to 5 pieces.
Highly elastic polyamide mooring line, 1:1 braided, in white with a black-red-black identification thread. Extremely abrasion and tear resistant, as well as UV stable.
- Short multi-dock fenders for high protection of the boat - Concave flattened on the bridge side for mounting - The horizontal and vertical fastening results in a very stable design - Colour: white - Material: PVC.
Ship shroud protectors made of anodized aluminum tubing with robust plastic caps reliably protect sails and covers from chafing.
Flat, elastic glasses strap made of high-quality neoprene for use on board and during water sports. Secure hold for sunglasses and sports glasses, floats, comfortable to wear and suitable for any head size – ideal for sailing, boating and …
Robust drysuit made of 200DOX nylon with a soft special coating for reliable protection during boating activities.
Allpa thermomagnetic fuse 135A
- Thanks to a 3D propeller, the wind speed can be accurately measured in any position to the wind - A thread in the aluminium base allows tripod mounting - Protective cover for propellers included - Indication of instantaneous, maximum and …
The Spirit 1.0 is designed for tenders, inflatable boats, dinghies, and sailing yachts up to 1500 kg and offers comparable thrust to a 3 hp gasoline outboard motor.
DF140BT Weight: L 18g x 190kg Shaft length: L- 508cm x – 635cm Propeller pitch: T 15-25" (RR) Z 17-23 (CR) Color: Black (optional white) (optional matte black) Displacement: 2045 cc Power (kW/HP): 103/140 Bore x Stroke: 86 x 88 Shift: Mech …
- The ideal addition to the railing grill - Made of white plastic - incl. mounting bracket for 22 and 25 mm pipes.
Connections: For 19 mm (¾ inch) inlet hose, 25 mm (1 inch) outlet hose Fuse size: 25 amps Maximum current: 20 amps High-performance centrifugal wastewater pump for shredding and evacuating waste Uses existing pressurized water pump for flu …
- 2-component epoxy lightweight filler. Strong adhesion, resistant to water and good sandability - for all repairs in the surface and underwater area.
Doormat with anti-slip coating. Material: 100% latex and polyester.
- Rubberized textile tape with waterproof adhesive - soft and structured - increases the GRIP where it is required - can be removed cleanly and without leaving any residue - ideal on the tread, deck edge or on the boom.
Polished stainless steel Parasol holder for umbrella poles up to 38 mm Ø Mounting on railings, tables, chairs or loungers 360°
Capri lifebuoy for boats and yachts with a special recess for winding up to 30 m of rope (Ø 8 mm). Ensures clear and readily available safety equipment on board.
- End cap to protect the slat pockets - Color: blue.
Folding, solid mahogany bathing ladder with chrome-plated mounting brackets, 4 steps. Width: 340 mm
- Is a highly concentrated cleaning additive for all diesel and super diesel grades (DIN 51601) - Cleans injectors, injection pump and the entire fuel system from deposits - should be used before or after winter storage - Ensures lower con …
Extra strong shaft with 1.2 mm diameter aluminum 2 reinforced nylon blades 4-piece design with SUP and kayak function Manufacturer
EN ISO 12402-5 50N certified neoprene vest PWC foam for optimal buoyancy Safety D-ring Water drainage system With zipper and two buckles for the best possible fit
The Allroundmarin Dynamic Pro 370 is the largest model in the series and offers space, stability, and driving pleasure for any situation. Thanks to its compact packing size, it is easy to transport and ready for use in a few minutes. Well-thought-out details such as stable handles, strap system, anchor roller, and resistant PVC material make the Dynamic Pro 370 a reliable companion for leisure and adventure.
Ultraleichtes Schlauchboot mit stabilem Aluminium-Rumpf für Törns, Hafenmanöver und Ausflüge auf See oder Binnengewässern. Komfortabler weicher Boden, hohe Stabilität und leichtes Handling. Robust verarbeitet, einfach zu transportieren und ideal für Crew, Skipper und Wassersport.
Original Mercury/Quicksilver Conversion Kit for Water Pressure Sensor. Includes the following parts: 1x pipe piece 1/8 inch x 4mm 1x Legris contra-angle handpiece 1x Mounting bracket 1x retaining clip 1x Screw 1x Nut 5/16 x 18 1x Washer 2x …
YAMAHA SERVICE KIT F150/F150A/F150B (04-05) 100HRS (8M0222281)
- Made of lacquered, seawater-resistant wood - Complete with mounting screws - Simple and quick installation on railing or rear basket - e.g. for dinghy engine.
- This set consists of all anodes that are installed on the respective drive - Suitable for Volvo Penta SX and SX-M - Only suitable for fresh water
Portable compressor cool box with 13 l • Removable cup holder for free access to the interior • Economical LED interior lighting for optimal visibility • Digital, dimmable display for quick temperature control • Integrated fixing options f …
Robust fender cover made of 2 mm thick neoprene for reliable protection of the hull and fender. Waterproof, durable and a perfect fit for Dan Fender models. Read more
Be the first to review this product.
No reviews yet.
No questions yet.
Quick, effortless mooring thanks to clever construction • Unique anti-wear design holds the pin above the receiver, protecting the highly polished surface • Gently rounded attachment tabs protect your line • Precision machined from high-qu …
- With the Fastfender, you can hang the fender on the railing of the boat in no time at all - Putting on the fender is also easy to do with one hand - For 6 - 12mm rope Ø - Design: for railing wire Length: 118mm
- With the Fastfender, you can hang the fender on the railing of the boat in no time at all - Putting on the fender is also easy to do with one hand - For 6 - 12mm rope Ø - Version: for 25mm pipe Length: 118mm
- Very stable fender hook - With spring bolt - Chrome-plated brass or stainless steel.
- With the Fastfender, you can hang the fender on the railing of the boat in no time at all - Putting on the fender is also easy to do with one hand - For 6 - 12mm rope Ø - Version: 32mm tube Length: 158mm
The fender clip is made of a heavy PVC, additionally edge-reinforced - Brand cordage with prefabricated loop - Easy installation - The fenders are quickly brought into position - a node only when permanently occupied for securing - Safe an …
- Knitted from UV-resistant acrylic - Effectively protects the hull of the boat - Prevents noise - washable up to 20 °C.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch