Your cart is empty
- Dome-shaped cover for bilge and ventilation openings, hose passages, etc. - Stainless steel sheet.
U-bolt with 2 counter plates and tear-off nut for theft protection
The Herkules Vision 1552 is a 1:1 braided, heat-fixed high-performance line made of high-strength polyester.
- With the Fastfender, you can hang the fender on the railing of the boat in no time at all - Putting on the fender is also easy to do with one hand - For 6 - 12mm rope Ø - Design: for railing wire Length: 118mm
High-quality turnbuckle with fork terminal made of polished AISI 316 stainless steel. Robust, seawater-resistant design for standing rigging and precise tensioning work on shrouds and stays.
Waterproof, tall boat boots made of durable rubber for optimal grip on board and ashore. Non-slip, siped sole for wet decks, with a comfortable cuff and practical drawstring for individual closure.
Waterproof spray top for sailing and watersports. Extremely waterproof and highly breathable, made from lightweight, thin material.
Allpa thermomagnetic fuse 135A
- Ideal flagstick holder for the railing - Also suitable for transom mounting - Mounting plate with 8 holes - Mounting with 2 plastic clamps (screwed to the railing tube) - Niro Aisi 316 - with plastic can in the holder.
The Spirit 2 Ultra battery is a high-performance lithium-ion battery with a nominal voltage of 48.1 VDC and a capacity of 32 Ah, providing a reliable power supply for demanding applications.
"DF175APL DF175APX Gewicht: L 236g X 241 kg Schaftlänge: L- 508 cm x – 635 cm Propellersteigung: 15“-27,5“(RR) 17“-26“ (CR) Farbe: Schwarz (opt. weiß) Hubraum: 2867 cc Leistung (kw/ PS): 128,7/175 Bohrung x Hub: 97 x 97 Schaltung : Digital …
Portable compressor cool box with a 57-liter capacity Seamless temperature control between +20 and -22 °C Integrated LED light and low power consumption Portable for home and travel Robust construction with reinforced corners and stainless …
- PE tank suitable for waste water - Including connection nozzle for inlet, tank ventilation and suction nozzle - The system includes a 12V suction pump with a 19 liter flow rate and a hose connection for 38mm.
- Epoxy primer is a diffusion-tight 2-component anti-corrosion coating for aluminum, steel, wood, and polyester yachts and boats - Suitable for surface and underwater coatings - Has a rust-protecting effect on steel and prevents osmosis on …
Doormat with anti-slip coating. Material: 100% latex and polyester.
- Ideal for high-quality sun and privacy protection - The mesh fabric allows sufficient light to pass through (45%) while offering protection (65%) - Material: scrim 295 g/m² - Tear strength: 199/200 N/50mm - Color: royal blue, pearl gray …
Practical Economy boat skimmer made of robust, orange plastic – ideal for quickly removing water from on board.
- Max. 5 meters long - Material: Fiberglass - Color: White.
- Made from 25 mm stainless steel tubing and waterproof wood - Easy assembly using tab fastening. Width: 280 mm
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
Extra strong shaft with 1.2 mm diameter aluminum 2 reinforced nylon blades 4-piece design with SUP and kayak function Manufacturer
Stable on the water, predictable, jump-friendly, and enables smooth control and easy edge control 3-stage rocker for good, predictable pop Ideal board for motivated beginners to advanced riders Easy-to-adjust bindings
The Allroundmarin Kiwi 249 with high-pressure air floor is the ideal lightweight tender boat that speeds up setup with its minimal weight. The inflatable floor ensures quick readiness for use and offers you high stability thanks to the 42 cm thick tubes. This model is perfect for anglers who prioritize mobility and desire a warm, solid standing surface.
- This inexpensive inflatable boat seat is made of a sturdy PVC hose with a comfortable coating on the seat - Easy installation by clamping between the inflatable boat hoses. - Maximum filling: 0.1 bar Dimensions 94 cm Variation: Total hei …
Robust RIB inflatable boat with a stable aluminum hull and durable ORCA® Hypalon tubes. The double bottom ensures a dry stance on board, while the lightweight construction allows for strong performance even with small engines – ideal for cruising, swimming trips and sporty outings.
YAMAHA SERVICE KIT F75/F90 (16&NEWER) + F80B/VF90 (ALL YEARS) + F115 (06&NEWER) 100HRS (8M0222222)
Original Mercury/Quicksilver thrust washer for propellers with Flo-Torq I (old version, rubber hub) This replacement part replaces the following part numbers: 12-31211A3 12-31211A2 12-31211 SKU 12-31211K03
DPH-D1 DPH-E 527 577S 627SV DPI-A DPH-A DPH-C
- Fuel hand pump for outboard engines - With inlet and outlet valve - For connection with 7 mm hose Ø. Dimensions: Ø 4.5x15cm
- Suitable for salt water - Manufacturer: Tecnoseal
Modular seat base frame Beta from Zwaardvis for flexible seat and table base structures on board. Can be adjusted with a 76 to 60 mm tube or as a fixed length with a 60 mm tube.
Deutsch